024380 - Anybus M-Bus to Modbus TCP gateway - Anybus Vietnam

Giá bán: Liên hệ

Mã sản phẩm: 024380

Thương hiệu: HMS

Tình trạng: Còn hàng

Ordering information

ORDER CODES: 

024380 (Up to 20 M-Bus Loads)

025070 (Up to 80 M-Bus Loads)

Included components: Quick start guide, manuals. (Power supply not included)

Guarantee: 3 years

Tư vấnhotline0965 746 247

Anybus M-Bus to Modbus TCP gateway

The Anybus M-Bus to Modbus TCP gateway allows M-Bus devices to communicate on a Modbus TCP network. The gateway decodes M-Bus telegrams making it possible to map meter values to Modbus registers. This enables central control and supervision of measuring devices which usually use the M-Bus protocol.
 

GET A COMPLETE SYSTEM OVERVIEW

By getting data on consumed electricity, water, gas etc. straight into your PLC system, you can get a complete overview of your site in a SCADA system, including building parameters which otherwise have to be checked separately.
 

ACCESS OTHER NETWORKS - PAIR WITH AN ANYBUS X-GATEWAY

You can also connect your M-Bus devices to any other industrial network by pairing the M-Bus gateway with an Anybus X-gateway for Modbus TCP. Connect to Rockwell Logix, Siemens, Mitsubishi PLC's and more.
 

EASY CONFIGURATION - NO PROGRAMMING REQUIRED

The accompanying web-based configuration tool allows you to set up the gateway in an easy-to-use web interface. No programming is necessary.

Anybus M-Bus to Modbus Gateway

    DatasheetFile download

    M-Bus to Modbus application overview

    Features and benefits

    • Get data on your consumption of electricity, water or gas onto a Modbus TCP network
    • Enable total overview of your site’s consumption, including building parameters (electricity, water, gas etc.) into a SCADA system
    • No hardware or software changes are required for the connected M-Bus device
    • Two versions available supporting connection up to 20 or 80 M-Bus Loads
    • Connect to other networks and PLC systems by combining with an Anybus X-gateway and access 10 additional industrial networks
    • Easy web-based configuration tool. No programming required.
    • Global free technical support and consultancy.

    M-Bus Master interface

    • M-Bus Master interface compliant with EN 13757-2
    • Connects either 20 or 80 M-Bus Loads

      Modbus TCP Server interface

      • Conforms to Modbus Appl. Protocol Spec. V1.1b
      • Connects up to 5 Modbus TCP Clients
      • 100 Mbit/s

      Technical specifications

      Dimensions (L•W•H) 89 x 35 x 58 mm or 3,50 x 1,38 x 2.28 inches                           
      Weight 80g or 0,18 lbs  
      Operating temperature 0 to +50 °C  or  32 to +122 °F  
      Power supply 24 ±5 VDC  
      Power consumption 2 W idle state, 10 W max.  
      Ethernet connector 1x shielded RJ45 100 Mbit/s  
      M-Bus connector 5-pin screw terminal, max. 2.5mm²  
      Galvanic isolation On Ethernet side  
      Mechanical rating IP20, Plastic housing  
      Mounting DIN-rail (EN 50022 standard)  
      Certifications CE  

       

        File Version Size Download

      MANUALS/DESIGN GUIDES

        User Manual (024380-C, 025070-C) 2.4 2.39 MB Download

      CERTIFICATIONS

        EU Declaration of Conformity 2016-06 317.81 KB Download

      OTHER DOCUMENTS

        Comparison document for -B and -C release   740.13 KB Download

      SOFTWARE

        Netdiscover 1.02 20.98 MB Download

      VIDEOS

        HMS Academy - How to connect M-bus sensors to PROFINET - TIA Portal - 31.32 MB Download

      BROCHURE/DATASHEET

        Anybus M-Bus to Modbus TCP gateway 2.0 1.92 MB Download
           

      Để được tư vấn miễn phí

      Quý khách hàng vui lòng để lại thông tin bên dưới

      zalo