1.01.0091.01000 - Ixxat CANnector - Ixxat Vietnam

Giá bán: Liên hệ

Mã sản phẩm: 1.01.0091.01000

Thương hiệu: HMS

Tình trạng: Còn hàng

Order number

Vui lòng xem bảng dưới

Tư vấnhotline0965 746 247

CANnector

CANnector is a DIN rail mountable platform with many different communication interfaces. It is ideal for applications in which several bus systems are to be merged into a single device with its own processing power – e.g. for logging or gateway applications.

All applications run on the device, a PC is only needed for configuration or stimulation/visualization of data, as the actual intelligence – for e.g. the transport protocols – is outsourced to the embedded platform.
 

HMS provides with  Ixxat ACT (Advanced Configuration Tool) an easy to use Windows-based tool enabling customers to configure the device via drag-&-drop. Most use-cases can be solved by using ACT Freeware (free of charge).

HIGHLIGHTS

  • DIN rail mountable
  • Industrial Ethernet support (like EtherCAT)
  • Up to 8 CAN (FD) channels in one device
  • CAN listen only (CAN RX) for data logging use-cases
  • Only a few µs delay of frames in classical gateway applications
  • Switch-on CAN (self switch on in case of any CAN communication or a defined message)
  • Up to 4 kV galvanic isolation
  • Compatible to the Ixxat CAN@net Generic Ethernet protocol and CAN@net NT protocol
Dimensions (L x W x H) 196 x 113 x 43 mm
Protection class IP40
Weight Approx. 790 g
Operating temperature -40 °C to +80 °C
Power supply 6-36 V DC
Current consumption Typ. 420 mA at 12 V (sleep mode < 2 mA)
Housing material Aluminum, stainless steel
Relative humidity 10-95 %, non-condensing
Host system Power PC, 256 MByte RAM, 256 MByte Flash
Ethernet 10/100 MBit/s, RJ45
USB 2.0 high-speed device, USB-B
2.0 high-speed device, USB-A
CAN FD transceiver Microchip MCP2562FD
CAN RX only Hardware switchable
CAN high-speed transceiver  Texas Instruments SN65HVD251
CAN bus termination resistor High-speed/CAN-FD: none
LIN transceiver NXP TJA1020

 

  • CANnector
  • Cables for Ethernet, USB 
  • Hardware manual
  • Runtime licences for Gateway

Application examples – How bridges and gateways are used

Interconnection of networks via wireless Bluetooth enables networking of hard to access or moving components.

Bridging CAN via Bluetooth

Remote access for analysis via Ethernet as well as status and alarm messages on mobile devices using MQTT based cloud connection. 


automotive-use-cases-bridges2

Bridging large distances via Ethernet to connect test benches and test systems.
Remote access for test systems

Easy linking of automotive buses with HMS-Hub and OPC UA based applications.

CANnector linking automotive buses with HMS Hub and OPC UA based applications

Order number

Order number Product name Galvanic
isolation
FlexRay
A/B 
CAN
interface
count (total) 
CAN high speed  CAN low speed CAN FD (B) LIN EtherCAT (slave) Analog in  Digital in/out
(A) (D)
Digital in/out
(A) (E)
Ethernet 10/100
Base-T
USB 2.0 device  USB 2.0 host SDHC slot  Internal WiFi
1.01.0091.01000 CANnector Log * yes 0 6 6 0 2 2 0 0 0 2 1 1 2 0 0
1.01.0091.02000 CANnector Range ** yes 0 6 6 0 2 2 0 0 0 2 1 1 2 0 0
1.01.0091.03000 CANnector Bridge ** yes 0 6 6 0 2 2 0 0 0 2 1 1 2 0 0
1.01.0091.00000 CANnector S yes 0 6 6 0 2 2 0 0 0 2 1 1 2 0 0
1.01.0091.00010 CANnector L yes 0 8 8 0 4 2 0 0 0 2 1 1 2 0 0
1.01.0091.00100 CANnector S with EtherCAT yes 0 6 6 0 2 2 1 0 0 2 1 1 2 0 0
1.01.0091.00110 CANnector L with EtherCAT yes 0 8 8 0 4 2 1 0 0 2 1 1 2 0 0

 

(A) Input or output per software switchable
(B) 6/8 CAN in total, thereoff max. 2/4 CAN-FD capable
(D) 4 digital inputs/outputs (5 V TTL)
(E) digital inputs (max. 34 V), digital outputs (max. 34 V, 1 ampere)

* CANnector Log – based on CANnector S, ready2use with a basic logging configuration and a 16GByte USB storage device
** CANnector Range/Bridge  – based on CANnector S, ready2use with a basic range extending or bridge configuration

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới

zalo