1.01.0210.20200 - CAN-CR100 - Ixxat Vietnam

Giá bán: Liên hệ

Mã sản phẩm: 1.01.0210.20200

Thương hiệu: HMS

Tình trạng: Còn hàng

Order number:

1.01.0210.20000 - CAN-CR100, with bus termination resistors

1.01.0210.20200 - CAN-CR100, without bus termination resistors

Tư vấnhotline0965 746 247

CAN-CR100

CAN / CAN FD repeater with screw terminals

The CAN-CR100 is used for galvanic isolation of two segments of a CAN / CAN FD network. As a special feature, the repeater separates a defective segment from the rest of the network, allowing the remaining network to continue working. After the fault has been eliminated, the segment is automatically switched back to the network. The galvanic isolation is provided for the CAN / CAN FD segments as well as for the power supply.

FEATURES AND BENEFITS

  • CAN and CAN FD interfaces in one device
  • Cost savings due to simple wiring
  • Increased system reliability
  • Almost no influence on real-time behavior

CONTENTS OF DELIVERY

  • CAN-CR100
  • User manual

TECHNICAL SPECIFICATIONS

Display Transmit and defective segment (two duo LEDs, one for each segment), Power (one LED)
CAN bus interface ISO 11898-2 with CAN choke. Two screw terminals. Available with and without integrated CAN termination.
CAN baudrate Up to 1 Mbit/s
CAN FD bus interface ISO CAN FD and nonISO CAN FD
CAN FD baudrate 500 kbit/s (arbitration bitrate) and up to 4 Mbit/s  (flexible data rate)
Delay typ. 175 ns (corresponds to ~35 m bus length)
Power supply 9-36 V DC, typ. 70 mA, max. 100 mA, through terminals
Galvanic isolation 1 kV DC / 1 sec, 500 V AC / 1 min; CAN 1, CAN 2 and power supply are galvanically isolated from each other.
Certification CE, FCC
Temperature range  -20 ºC ... +70 ºC
Housing, size Plastic enclosure, 22.5 x 105 x 114 mm

 Order number

1.01.0210.20000 CAN-CR100, with bus termination resistors
1.01.0210.20200 CAN-CR100, without bus termination resistors

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới

zalo