AB7518-Anybus X-gateway - Modbus Plus Slave - PROFINET-IRT Device

Giá bán: Liên hệ

Mã sản phẩm: AB7518

Thương hiệu: Anybus - HMS Industrial Networks

Tình trạng: Hết hàng

The Anybus X-gateway allows you to seamlessly inter-connect/extend PLC control systems and their connected devices between a Modbus Plus and a PROFINET-IRT network. FAST COPYING OF I/O DATA The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads...
Tư vấnhotline0965 746 247

The Anybus X-gateway allows you to seamlessly inter-connect/extend PLC control systems and their connected devices between a Modbus Plus and a PROFINET-IRT network.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Slave/Device on both networks, providing a simple network extension. The data transmission between the two networks is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

Features and benefits

  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy

Modbus Plus Slave Interface 

Modbus Plus address settings made via on-board DIP switches

  • Complete Modbus Plus slave functionality
  • Up to 32 words of global (cyclic I/O) data in each direction
  • Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register
  • Point-to-point parameter data (up to 125 words)
  • Onboard Node ID and Source ID switches
  • Modbus Plus baudrate 1 Mbit/s
  • 1x D-sub 9-pin female network connector

PROFINET IRT Device/Slave interface 

PROFINET IRT Device/Slave settings can be made either via the built-in web interface, or by importing the provided .GSDML file into engineering tool of the controlling PLC. 

  • Complete PROFINET RT and IRT functionality specification 2.3
  • Conformance tested supporting Class A, B and C
  • Max 512 bytes of Input and 512 bytes of Output data
  • Baud rate 10/100 Mbit/s Isochronous cycle times 0.25 to 4 ms (25 Us increments)
  • SNMP-MIBII support
  • TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
  • LLDP (Linked Layer Discovery Protocol)
  • Support for I&M (Identification & Maintenance)
  • PROFINET uplink configuration via .GSDML file
  • Dual port cut-through switch
  • Dual RJ-45 ports available simultaneously
  • PROFINET Asset Management

Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight 400g or 0,880 lbs
Operating temperature -25 to +65 °C  or  -13 to +149 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption     max. 400mA (Typical 200mA)
Enclosure material  Aluminium and plastic
Installation position Vertical / Flat*
Galvanic isolation YES, on both BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
Mounting DIN-rail (EN 50022 standard)
I/O configuration via USB port with Anybus Configuration Manager software
Certifications CE, CULUSRoHS

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới

zalo