AB7526-Anybus X-gateway - Modbus-TCP Slave - POWERLINK Device

Giá bán: Liên hệ

Mã sản phẩm: AB7526

Thương hiệu: Anybus - HMS Industrial Networks

Tình trạng: Còn hàng

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus-TCP and POWERLINK networks. FAST COPYING OF I/O DATA The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from...
Tư vấnhotline0965 746 247

The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between Modbus-TCP and POWERLINK networks.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Slave/Device on both networks. The data transmission is completely transparent with a maximum data capacity of 254 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

 

  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Supports up to a maximum of 512 bytes of PDO + SDO Input and Output data in each direction
  • Supports up to a maximum of 254 bytes of PDO Input and Output data in each direction
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy

Modbus TCP Slave settings can be made either via the built-in web interface, or by importing the provided .EDS file into engineering tool of the controlling PLC.

  • Conforms to Modbus TCP v1.0
  • Modbus TCP class 0, class 1 and partially class 2 slave functionality
  • 10/100Mbit operation in full or half-duplex
  • Integrated FTP server provides easy file management using standard FTP clients
  • Web server with dynamic data capability and Server Side Include (SSI) capability
  • Email client with dynamic data capability and Event-triggered email handling
  • Per-user security framework
  • Quality of Service (QoS) available
  • DNS Capability
  • TCP/IP settings via DHCP/ARP/Anybus IPconfig (HICP)
  • Integrated switch allowing for a daisy-chain topology
  • 2x RJ-45 ports available simultaneously. 

POWERLINK Device/Slave settings can be made either via the built-in web interface, or by importing the provided .XDD file into engineering tool of the controlling PLC. 

  • Max 254 bytes of Input and 254 bytes of Output data
  • Baud rate 100 Mbit/s Isochronous
  • Supports ring redundancy
  • POWERLINK uplink configuration via .XDD file
  • Dual port hub
  • Multiplexing
  • Poll Response Chaining
  • Supports segmented SDO transfer
  • Dual RJ-45 ports available simultaneously
Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
Weight 400g or 0,880 lbs
Operating temperature -25 to +65 °C  or  -13 to +149 °F 
Storage temperature -40 to +85 °C  or  -40 to +185 °F 
Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
Current consumption     max. 400mA (Typical 200mA)
Enclosure material  Aluminium and plastic
Installation position Vertical / Flat*
Galvanic isolation YES, on both BUS/Ethernet side
Mechanical rating IP20, NEMA rating 1
Mounting DIN-rail (EN 50022 standard)
I/O configuration via USB port with Anybus Configuration Manager software
Certifications CE, CULUSRoHS

 

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới

zalo