AB7900 - Anybus X-gateway – EtherCAT Slave - EtherCAT Slave

Giá bán: Liên hệ

Mã sản phẩm: AB7900

Thương hiệu: Anybus - HMS Industrial Networks

Tình trạng: Còn hàng

Ordering Information

ORDER CODE: AB7900

INCLUDED COMPONENTS:
- Quick start documentation
- USB configuration cable
- Configuration software available for download
- (Power supply not included)

Tư vấnhotline0965 746 247

Anybus X-gateway – EtherCAT Slave - EtherCAT Slave

The Anybus X-gateway allows you to seamlessly inter-connect or extend PLC control systems and their connected devices on an EtherCAT network.

FAST COPYING OF I/O DATA

The X-gateways primary function is with the fast transfer of cyclic I/O data between the two PLC systems. This offloads your PLC from working with additional calculations. The gateway acts as a Slave on both networks and provides a simple network extension. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

x-gateway-ects-ects

    DatasheetFile download

    Features and benefits

    • Fast copying of cyclic I/O data between the two EtherCAT networks (10-15 ms)
    • Proven and tested with all PLC manufacturers
    • Supports up to a maximum of 512 bytes of Input and Output data in each direction
    • Optional control and status information added to the I/O data for diagnostic purposes
    • Robust stand-alone housing for use in harsh industrial environments
    • Global free technical support and consultancy

    EtherCAT Slave interface

    EtherCAT Slave settings can be made by importing the provided .XML file into engineering tool of the controlling PLC.

    • Complete EtherCAT slave according to DS 301 V4.022
    • Supports CANopen over EtherCAT
    • Max 512 bytes of Input and 512 bytes of Output data (PDO + SDO)
    • Baudrate 100 Mbit/s full duplex
    • 4 FMMU channels (can be used freely by the EtherCAT master for any purpose.)
    • 4 SM channels
    • Bit-oriented FMMU operation
    • Position addressing, node addressing and logical addressing
    • PDI Watchdog
    • Output I/O Sync Manager Watchdog
    • Integrated switch allowing for a daisy-chain topology
    • 2x RJ45 EtherCAT connectors

    Technical specifications

    Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
    Weight 400g or 0,880 lbs
    Operating temperature -25 to +65 °C  or  -13 to +149 °F 
    Storage temperature -40 to +85 °C  or  -40 to +185 °F 
    Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
    Current consumption     max. 400mA (Typical 200mA)
    Enclosure material  Aluminium and plastic
    Installation position Vertical / Flat*
    Galvanic isolation YES, on both BUS/Ethernet side
    Mechanical rating IP20, NEMA rating 1
    Mounting DIN-rail (EN 50022 standard)
    I/O configuration via USB port with Anybus Configuration Manager software
    Certifications CE, CULUSRoHS

    Ordering Information

    x-gateway-ects-ects

    ORDER CODE: AB7900

    INCLUDED COMPONENTS:
    - Quick start documentation
    - USB configuration cable
    - Configuration software available for download
    - (Power supply not included)
     

    GUARANTEE:  3 years

    Để được tư vấn miễn phí

    Quý khách hàng vui lòng để lại thông tin bên dưới

    zalo