Anybus-Communicator - Modbus RTU Master - EtherNet/IP Adapter - ABC3007

Giá bán: Liên hệ

Mã sản phẩm: ABC3007

Thương hiệu: Anybus - HMS Industrial Networks

Tình trạng: Còn hàng

Ordering Information 


WARRANTY:  3 years

Tư vấnhotline0965 746 247


Order Code: ABC3007
Modbus RTU Master - EtherNet/IP Adapter

Integrate your Modbus RTU based industrial devices and equipment to EtherNet/IP control systems without any changes to the device. Just connect, configure and you’re done.

The Anybus Communicator can transfer large amounts of data, is fast to configure thanks to its’ drag and drop web interface and is built on trusted Anybus technology.

  • Web-based drag and drop configuration interface
  • Transfer up to 1 448 bytes of data in both directions (requires large forward open)
  • -25 to +70 °C industrial temperature range
  • Powered by award winning NP40 network processor
  • Security chip, security switch and secure boot

Drag and drop web interface
To make sure you spend as little time as possible to configure the Communicator, we have built a graphical and responsive web-based user interface. No software need to be install, just open your favorite web browser and get started.

Transfer up to 1 448 bytes of data
Demand for more data is constantly growing and the Communicator has been equipped to handle the challenge. It can transfer 1 448 bytes from the PLC to the Gateway and 1 448 bytes from the gateway to the PLC, 2 896 bytes in total (requires large forward open). Support for up to 150 Modbus commands means even complex configurations with multiple nodes can be handled with ease.

Industrial temperature range
An industrial operating temperature range of -25 to +70 °C ensure the Communicator can excel under harsh conditions.

Powered by proven NP40 technology
The Communicator is built on the award-winning and proven Anybus NP40 network processor. With hundreds of thousands NP40:s used in Embedded applications across the world, it is the industry benchmark for reliable industrial communication.

Security switch
Even with sophisticated security measures, human error is still the main cause of security breaches. To simplify security, we added a physical security switch on the Communicator. It locks your configuration and prevent any access to the web-based configuration interface. Just flip it when your configuration is done and watch the padlock LED on the product light up.

Security chip and secure boot
To meet current and future security challenges, the Communicator is equipped with the latest Anybus security chip. Secure boot ensures the firmware has not been tampered with.

Ethernet configuration port
With a dedicated Ethernet configuration port you don’t need any special configuration cable. In addition, it is easy to connect to the gateway to monitor network traffic.

Optimized for DIN-rail mounting
The slim form factor, front facing network connectors, screw in serial cable connector and the neat cable tie ensure it is fast and simple to install and connect the Communicator. 

EtherNet/IPTM Device Level Ring
To make sure communication can continue to flow even when cables break, the Communicator supports Device Level Ring with Beacon Mode for media redundancy, network fault detection and network fault resolution.

When open the Communicator web interface you immediately see the status of the EtherNet/IP connection and serial connection. You can even see the status of individual serial nodes. It’s also equipped with a serial log and an event log for further analysis.

Sometimes you run into a problem where you need help. That’s why we have included a support page in the user interface with contact information. There is even a button to generate a support package to simplify troubleshooting.


Ports 1 x RS232/RS485
Baud rate 1200 bps to 128 kbps
Max stations 31
Isolation Galvanic isolation 
Connector 7-pole Phoenix connector 
Max nodes 31


Modes Master
Functions supported 1, 2, 3, 4, 5, 6, 15, 16, 22, 23
Max number of commands 150
Input data size 1 448 bytes
Output data size. 1 448 bytes


Ports 2 x Ethernet  
Isolation Galvanic isolation
Bitrate 10/100 Mbit full duplex
Connector RJ45
Switch. Dual port cut-through switch


Mode Adapter (slave) 
Messages Implicit and explicit
Max no of scanner connections. 1 input/output (exclusive owner)
3 listen only or input only
Input data size 1 448 bytes (with large forward open) 
Output data size 1 448 bytes (with large forward open) 
Network redundancy  Device Level Ring (DLR), beacon-based
Quick connect Class B
Certification ODVA conformant
UL Certification pending  
CE 2014/30/EU

EN 61000-6-2
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-4
EN 55032


IEC 60068-2-1 Ab
IEC 60068-2-2 Bb
IEC 60068-2-1 Ab
IEC 60068-2-2 Bb
IEC 60068-2-14 Nb
IEC 60068-2-30 Db
IEC 60068-2-78 Cab
IEC 60068-2-78 Cab

Vibration and shock

IEC 60068-2-27
IEC 60068-2-6

Waste certification WEE
ESD file Available 
Configuration software Web based configuration 
Configuration ports Dedicated 10/100 Mbit RJ45 Ethernet configuration port and EtherNet/IP ports
File Version Version Size Read online Download
  Safety and Compliance Information - Anybus Communicator 1.1 578.16 KB   Download
  Startup Guide - Anybus Communicator EtherNet/IP 1.1 2.70 MB   Download
  User Manual - Anybus Communicator EtherNet/IP 1 6.55 MB   Download
  User Manual - HMS IPconfig 1 183.30 KB   Download
  CE Declaration of Conformity 29 JUNE, 2020 354.85 KB   Download
  KC Certification 등록필증 29 JUNE, 2020 439.88 KB   Download
  UL Certificate of Compliance 27 AUG, 2020 528.21 KB   Download
  Anybus Communicator 2D And 3D Drawings 14 JUL, 2020 13.82 MB   Download
  HMS IPconfig - Utility for module TCP/IP configuration 2.88 MB   Download
  EDS File for EtherNet/IP   2.00 KB   Download

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới