Anybus Wireless Bridge II – Ethernet AWB3300

Giá bán: Liên hệ

Mã sản phẩm: AWB3300

Thương hiệu: HMS

Tình trạng: Còn hàng

Ordering information

ORDER CODE: AWB3300-B

Tư vấnhotline0965 746 247

Anybus Wireless Bridge II – Ethernet

Anybus® Wireless Bridge enables you create an industrial wireless connection in an industrial Ethernet network. This second generation of the proven and trusted Wireless Bridge can communicate via both Bluetooth and Wireless LAN and is ideal for communication through hazardous areas or hard-to-reach locations where cables are not desirable. It provides an effective wireless range of up to 400 meters.

BRIDGING TCP/IP ETHERNET

The Wireless Bridge makes it possible to operate leading TCP/IP based industrial Ethernet networks, such as BACnet/IP, PROFINET, EtherNet/IP and Modbus TCP, over Bluetooth and Wireless LAN 2.4 / 5 GHz. 

POINT-TO-POINT OR MULTIPOINT

Point-to-point or multipoint Anybus Wireless Bridge is often used as an Ethernet cable replacement (point-to-point communication). But it can also be used as an access point for up to seven Wireless LAN/Bluetooth clients.

Features and benefits

  • Use with point-to-point wireless Industrial Ethernet installations through hazardous or hard-to-reach locations
  • Use as an Access Point for up to seven clients
  • Suitable for AGV’s (Automatic Guided Vehicle)
  • Fast Roaming (IEEE 802.11r), High link speed (IEEE 802.11n), Robustness (three internal antennas, including MIMO) 
  • Eliminates the need for expensive or maintenance-heavy cabling
  • Bridges TCP/IP Ethernet and protocols such as: BACnet/IP, EtherNet/IP, Modbus-TCP and PROFINET
  • Max range of up to 400 meters
  • Full compatibility with Anybus Wireless Bolt — a wireless product for machine mounting
  • Easy setup via push button or web interface
  • Advanced configuration with AT commands
  • Compatible with PROFIsafe requirements
  • Rugged IP65 rated industrial design
  • Security features for a secure industrial operation
  • Three built in antennas for higher performance and better robustness
  • Operation with Wirelesss LAN, Bluetooth classic and Bluetooth Low Energy.

Wireless LAN Interface

  • Wireless standards: WLAN 802.11 a, b, g, n, d.
  • Operation modes: Access point or Client
  • WiFi channels: 2.4 GHz, channel 1-11 + 12-13 depending on regulatory domain scan.
  • 5 GHz Access Point: 36-48 (U-NII-1), 5 GHz Client: 100-116 + 132-140 and 120-128 depending on regulatory domain scan. (U-NII-1, U-NII-2, U-NII-2e).
  • RF output power: 18 dBm EIRP (including max antenna gain 3dBi)
  • Max number of slaves for access point: 7
  • Power consumption: 54mA@24VDC
  • Net data throughput: 20 Mbps. Link speed: max 130 Mbps (802.11n 2x2 MIMO)
  • Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.

Bluetooth Interface

  • Wireless standards (profiles): PAN (PANU & NAP)
  • Operation modes: Access point or Client
  • RF output power: 14 dBm EIRP (including max antenna gain 3dBi)
  • Max number of slaves for access point: 7
  • Power consumption: 36 mA@24VDC
  • Net data throughput: ~1 Mbps
  • Bluetooth version support: Classic Bluetooth v2.1
  • Security: Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved

Bluetooth Low Energy 

  • Wireless standards (profiles): GATT
  • Operation modes: Central or Peripheral (pending)
  • RF output power: 10 dBm EIRP (including max antenna gain 3dBi)
  • Max number of simultaneous connections for Central: 7
  • Power consumption: 36 mA@24VDC
  • Net data throughput: ~200 kbps
  • Bluetooth Low Energy version: 4.0 dual-mode
  • Security: AES-CCM cryptography

Ethernet Interface

  • Supports Ethernet protocols: IP, TCP, UDP, HTTP, LLDP, ARP, DHCP Client/Server, DNS support, SNMP user management and access control
  • Supports wireless bridging of Industrial Ethernet protocols: BACnet/IP, EtherNet/IP, Modbus-TCP, PROFINET
  • Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over
Wired interface Ethernet 10/100 Mbit/s
Dimensions (H•W•D) 93 x 68 x 33mm
Weight  120g or 0,26 lbs
Operating temperature -30 to +65 °C or -22 to +149 °F (Storage temp: -40 to +85 °C )
Power supply  9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
Power consumption 0.7W idle, 1.7W max
Enclosure material Plastic PC/ABS (Bayblend FR3010)
Mechanical rating  IP65
Mounting Two screws (Ø 4 mm) on flat surface. DIN rail mount option available (optional accessory).
Max range   400 meters
Configuration  Three different methods:
• Accessing the built-in web pages in the product
• Using Easy Config modes (via push button or inside web interface)
• Sending AT commands
Connectors

1x M12 for Ethernet (4-pin, D-coded)
1x M12 for Power 5-pin, A-coded)
RP-SMA antenna connector for external antenna

 Antennas AWB3000
Three internal antennas: 
1. 2.4 GHz  
2. 2,4GHz MIMO
3. 5GHz

 

 

AWB3010
One external antenna:
1. 2,4/5GHz dual band
The external antenna does not provide better range, but allows connectivity if the Wireless Bridge
needs to be placed inside a radio-secure environment such as a steel cabinet. When mounting inside a steel cabinet antenna cables with magnetic foot or screw mount should also be considered.


CERTIFICATIONS
 
Europe ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. 2014/53/EU
Radio Equipment Directive (RED)
USA  FCC 47 CFR part 15, subpart B.
UL: Ind. Cont. Eq. also Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D,T4. UL file: E203225
Canada ICES 003
Japan MIC
Other countries Australia, Colombia, Turkey, Malaysia, Peru, Mexico, Argentina.
Pending: Brazil, India, Philippines, South Africa, Korea.
   
   
WLAN Security  WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP.
Bluetooth Security 

Authentication & Authorization, Encryption & Data Protection, Privacy & Confidentiality, NIST Compliant, FIPS Approved

Purchasing instructions and terms and conditions:  How to buy

ORDER CODE

AWB3000  (WITH INTERNAL ANTENNAS)

wbII-icon

ORDER CODE

AWB3010  (WITH EXTERNAL ANTENNA)

wbII-antenna-icon  
Included components  

Quick start guide, manuals. (Power supply not included)

 
Optional Accessories

Order Code: 023040
Accessory Pack – 1.5 meter Ethernet Cable with RJ45 connector
and World power supply with 1.5 meter cable and M12 connector.

 023040
  Order Code: 024700
IP67 M12 connector kit for power and Ethernet,
with screw terminals
 
 024700
  Order Code: 024701
DIN clip with screws 
 
 024701
  Order Code: 024702
Replacement external antenna. Foldable, dual band.
RPSMA connector
 
 024702
  1.04.0085.00000
Magnetic antenna foot with 1,5 m cable and
RPSMA connector, excl. antenna.
 
 104008500000
 

1.04.0085.00003
Screw-mount antenna base with 1,5 m cable
and RP-SMA connector, excl. antenna 

 104008500003

 

Để được tư vấn miễn phí

Quý khách hàng vui lòng để lại thông tin bên dưới

zalo