Anybus Wireless Bolt CAN enables you to connect industrial machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth®, or Wi-Fi (Wireless LAN). It converts CAN data to/from TCP/IP communication over the wireless link.
With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an industrial IP66/IP67 protection class.
Up to 8 wireless nodes (1 master and 7 slaves). Wireless multi-drop (master–slave). The Bolt is transparent. Message from host to Bolt is forwarded to all slaves. Every slave response forwarded to the host.
CAN 2.0A/B (11/29 bit identifier).
Ethernet: 10/100BASE-T with automatic MDI/MDIX auto cross-over detection. For configuration only.
Wireless standards: IEEE 802.11 a, b, g, n, d.
Wireless standards (profiles): PANU & NAP
Diameter: 68 mm. Height: 75 mm (95 mm including connector. Outside height: 41 mm)
|Temperature Bolt (black)||
Shadow: -40 to +65 °C
|Temperature Sunbolt (white)||Shadow and direct sunlight: -40 to +65 °C
Storage temperature: -40 to +85 °C
|Output Power||WiFi 18 dBm EIRP - Bluetooth 14 dBm EIRP - Bluetooth Low Energy 10 dBm EIRP
All including antenna gain 3dBi
|Power Supply||9-30 VDC (-5% +20%), Cranking 12V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.|
|Power Consumption||0.7W idle, 1.7W max (54mA@24VDC with Wireless LAN and 36mA@24VDC with Bluetooth)|
|Enclosure material||Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 476C. Bottom: Celanex: XFR 6840 GF15. PBT glass reinforced plastic.|
|Mechanical rating||IP66 and IP67 for top (outside the host), IP21 for bottom (inside the host), UL NEMA 4X|
|Mounting||M50 screw and nut (50.5 mm hole needed)|
|Max Range||100 meters|
|Antenna||One built in antenna|
|Connector||Included plug connector (2x9p; 3.5mm, Phoenix DFMC 1.5/9-ST-3.5, push-in spring connection)|
|Vibration Compatibility||Sinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities; Number of axes: 3 mutually perpendicular (X:Y:Z), Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g.
Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms.
|Europe||ATEX: ATEX Category 3, zone 2 according to EN60079-15, product marking: EX II 3 G nA IIC T4. CE, 2014/53/EU Radio Equipment Directive (RED)|
|USA||FCC 47 CFR part 15, subpart B. UL: Ind. Cont. Eq. also
Listed Ind. Cont. Eq. for Haz. Loc. CL1, DIV 2, GP A,B,C,D, T4.
UL file: E203225
|Other countries||Brazil, Australia, Colombia, Turkey, Malaysia, Argentina, India, China, Korea, United Kingdom|
|Order Code||AWB2020, AWB2021|
|Included components||AWB2020: Anybus Wireless Bolt CAN - Black, 18-pin connector, 1x Installation guide.
AWB2021: Anybus Wireless Bolt CAN - Sunbolt white top, black base, 18-pin connector, 1x Installation guide.
AWB2306: Anybus Wireless Bolt CAN Starterkit, 2 x Bolt CAN, cables & 2 x power world supply
Order Code: 024703; Cable kit. Molded RJ45 Bolt connector wired with 1.5m Ethernet cable and 24 VDC power supply (world) + Extra Ethernet cable fastening to avoid cable strand breaks.