2 x CAN-FD, CAN, CAN Low-Speed, LIN
With the CAN-IB810/PMC (PCIexpress Mezzanine Format) HMS offers an interface board based on a modern and highly modular concept. The interface is available with two CAN-FD channels. Each channel can send and receive CAN-FD (ISO as well as non-ISO format) or CAN 2.0 A/B messages. With optional expansion modules the entire range of fieldbuses is covered by one card, from CAN-FD, CAN (ISO 11898-2), fault tolerant CAN (ISO 11898-3) to LIN.
The CAN-IB810/PMC is available with two CAN-FD channels with galvanic isolated interfaces. For use in the automotive field the high-speed CAN channels can optionally be switched to low-speed CAN via software. In addition, the card can be equipped with up to two LIN interfaces. Furthermore, the modular architecture of the interface card enables the easy extension with customer specific interfaces via piggyback modules.
Due to the high number of interfaces, the board is also suitable for demanding applications - such as
If necessary, the number of interface channels can be extended by using multiple cards within one PC.
|PC bus interface||PMC|
|PC address range||Plug & Play|
|Interrupts||Plug & Play|
|Microcontroller||32 bit microcontroller|
|CAN interface||2 CAN / CAN-FD interfaces; CAN 2.0 A/B; Sub-D9 plug according to CiA 303-1; Galvanic isolation (1 kV, 1 sec.)
Optional: CAN Low-Speed (switchable via software between CAN High-Speed and Low-Speed)
|LIN interface||Optional: up to 2 LIN (ISO 9141) interfaces; Sub-D9 plug|
|Power supply||3.3 V DC, 600 mA typ.|
|Temperature range||-20 ºC ... +70 ºC|
|Size||Approx. 74 x 149 mm|
|Order numbers||Optional expansions||Additional information|
|2||X||1.01.0314.22011||1-2 x Fieldbus Expansion
For variants and order numbers see table below
|Type||Galv. iso.||Order numbers|
|CAN Low-Speed (ISO 11898-3) / LIN (ISO 9141)
for PMC and XMC boards