PROFIBUS Master – Modbus RTU Slave - AB7808-F

Giá bán: Liên hệ

Mã sản phẩm: AB7808-F

Thương hiệu: HMS

Tình trạng: Còn hàng

Ordering Information

ORDER CODE: AB7808-F

INCLUDED COMPONENTS:
- Quick start documentation
- USB configuration cable
- Configuration software available for download
- Anybus OPC server software available for download
- (Power supply not included)

    Tư vấnhotline0965 746 247

    Anybus X-gateway – PROFIBUS Master – Modbus RTU Slave

    The Anybus X-gateway allows you to seamlessly inter-connect PLC control systems and their connected devices between PROFIBUS and CANopen networks.

    FAST COPYING OF I/O DATA

    The X-gateways primary function is with the fast transfer of cyclic I/O data between the two networks. This offloads your PLC from working with additional calculations. The gateway acts as a Master on the PROFIBUS network and a Slave on the Modbus RTU network. The data transmission is completely transparent with a maximum data capacity of 512 bytes in each direction.

    EASY CONFIGURATION - NO PROGRAMMING REQUIRED!

    The connection between the two networks is quickly set up in the Anybus Configuration Manager software, included with the X-gateway. No programming skills are needed to set up the X-gateway. As factory default the X-gateways have a pre-defined I/O size of 20 bytes I/O.

    AB7808

    Features and benefits

    • Fast copying of cyclic I/O data between PROFIBUS and Modbus RTU networks (10-15 ms)
    • Proven and tested with all PLC manufacturers
    • Supports up to a maximum of 512 bytes of Input and Output data in each direction
    • Powerful Master interface for PROFIBUS eliminates the need for a PLC controller
    • Optional control and status information added to the I/O data for diagnostic purposes
    • Robust stand-alone housing for use in harsh industrial environments
    • Global free technical support and consultancy

    PROFIBUS Master/Scanner interface

    An Anybus X-gateway with an integrated PROFIBUS Master interface can be used when there is no existing PROFIBUS controlling PLC.

    • Complete Profibus DP Master functionality according to IEC 61158
    • Controls up to 125 slaves
    • Optional Live List of the active status of the connected slaves (max 64 slaves)
    • Maximum 512 bytes of I/O data in each direction
    • Supports all baudrates up to 12Mbit/s
    • Supports multiple masters (token passing)
    • Profibus Master/Slave configuration via the included Anybus Configuration Manager Windows tool via an RS-232 configuration port
    • 1x D-Sub9 Male and 1x D-Sub9 Female connector

    Modbus RTU Slave interface 

    Modbus RTU network address settings made via on-board configuration switches 

    • Complete Modbus RTU slave functionality
    • Max 512 bytes of Input and 512 bytes of Output data
    • Modbus diagnostics support
    • Configuration via on-board DIP switches
    • Modbus RTU baudrate 12-57,6 kbit/s
    • 1x D-sub 9-pin female network connector

    Technical specifications

    Dimensions (L•W•H)   114 x 44 x 127mm or 4,49 x 1,73 x 5,00"
    Weight 400g or 0,880 lbs
    Operating temperature -25 to +65 °C  or  -13 to +149 °F 
    Storage temperature -40 to +85 °C  or  -40 to +185 °F 
    Power supply 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector  
    Current consumption     max. 400mA (Typical 200mA)
    Enclosure material  Aluminium and plastic
    Installation position Vertical / Flat*
    Galvanic isolation YES, on both BUS/Ethernet side
    Mechanical rating IP20, NEMA rating 1
    Mounting DIN-rail (EN 50022 standard)
    I/O configuration via USB port with Anybus Configuration Manager software
    Certifications CE, CULUSRoHS

    Để được tư vấn miễn phí

    Quý khách hàng vui lòng để lại thông tin bên dưới

    zalo